IV Set with Precision Flow Controller (Dial Type)- 1 Pack of 10

Product Description

The Angiplast IV Set with Precision Flow Controller is engineered for situations requiring strict control over fluid infusion rates. Unlike standard roller clamps, the integrated Dial-Type controller allows healthcare professionals to set flow rates between 5ml/hr and 250ml/hr with high accuracy, making it ideal for pediatric care, critical care, and medication requiring specific dosage speeds.

The set features a 60 drops/ml micro-drip chamber and a 15-micron fluid filter to ensure patient safety by trapping particulate matter. The 83-inch (approx. 200cm) soft, kink-resistant tubing ensures consistent flow, while the rotating Luer Lock adaptor guarantees a secure, leak-proof connection to the patient’s vascular access device.

Specifications:

• Flow Range: 5ml to 250ml per hour

• Drop Factor: 60 drops per ml (Micro Drip)

• Tubing: 2.7mm x 3.9mm PVC Tubing (Latex-Free)

• Tubing Length: 83 inches (50 + 130 + 15 cm configuration)

• Filter: 15-micron fluid filter

• Spike: Vented with guard (ISO 8536-4 compliant)

• Connector: Rotating Luer Lock Male Adaptor

How to Use

Step 1: Preparation Close the flow regulator dial (turn to ‘0’ or ‘OFF’). Remove the protective cap from the spike.

Step 2: Insertion Insert the spike firmly into the IV solution container (bottle or bag). If using a rigid bottle, open the air vent on the spike.

Step 3: Priming Squeeze the drip chamber until it is half full. Open the flow regulator dial slowly to prime the line, allowing fluid to flow through the tubing and expel all air.

Step 4: Connection Once the line is fully primed and free of air bubbles, close the dial. Connect the rotating Luer Lock adaptor to the patient’s IV cannula or catheter.

Step 5: Setting Flow Rate Adjust the dial to the prescribed flow rate (e.g., 100ml/hr). Verify the drop rate in the chamber to confirm flow.

Step 6: Monitoring Regularly check the flow rate and IV site as per hospital protocol to ensure consistent delivery.

Who Is This For?

• Pediatric Wards Essential for delivering precise, low-volume fluid amounts to children and infants.

• Critical Care Units (ICU/CCU) For patients requiring medication at strictly controlled rates without an electronic pump.

• General Hospital Wards Routine infusions where gravity flow accuracy is prioritized over standard roller clamps.

• Home Healthcare Safe and easy-to-set dial system for patients managing long-term therapies at home.

• Chemotherapy & Oncology Administration of medications requiring specific infusion speeds

  Benifits

• Enhanced Accuracy The dial-type controller reduces the margin of error associated with traditional roller clamps, ensuring patients receive the exact prescribed volume.

• Patient Safety The 15-micron fluid filter prevents particles from entering the bloodstream, while latex-free materials reduce the risk of allergic reactions.

• Clinical Efficiency Quick-set dial saves nursing time compared to counting drops and adjusting manual clamps repeatedly.

• Secure Connections The rotating Luer Lock prevents accidental disconnections, reducing the risk of blood exposure or medication loss.

• Flexibility The vented spike design allows the same set to be used with both glass bottles and plastic bags, reducing inventory complexity.

Product Life Cycle

• • Manufacturing: Assembled in Class 10,000 clean rooms to ensure sterility.

  • Quality Testing: Tested for flow accuracy, leak resistance, and tubing flexibility.

  • Sterilization: ETO (Ethylene Oxide) sterilized.

  • Packaging: Individual sterile peel-pack.

  • Usage: Single-use device – NEVER reuse.

  • Disposal: Dispose of as biohazardous waste immediately after use.

FAQs

Q: What is the flow rate range for this set?
A: The dial can be set precisely between 5ml/hour and 250ml/hour.

Q: Is this a macro or micro drip set?
A: This is a Micro Drip set with a drop factor of 60 drops/ml, suitable for precise, slower infusions.

Q: Can I use this with glass bottles?
A: Yes, the spike is equipped with an air vent that can be opened for use with rigid glass bottles or closed for plastic bags.

Q: Does it contain latex?
A: No, the entire set, including the tubing and Y-site, is Latex-Free.

Q: What is the length of the tubing?
A: The total tubing length is approximately 83 inches (approx. 210cm), segmented as 50cm + 130cm + 15cm.

Technical Specifications Table

General Specifications Table